Samsung Chrono User Manual page 37

Voice Method
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
In standby mode, press and hold the 0 key to launch Voice
1.
SVC.
"Say a Command" appears in the display and is
pronounced through the speaker.
Say "Lookup".
2.
Voice SVC prompts you to "Say the name."
Speak clearly and say the full name of the person you want
3.
to call, exactly as it is entered in your Contacts list.
• If Voice SVC recognizes the name you said, the Contact entry
information for that name appears in the display.
• If Voice SVC does not recognize the name you said, a choice list of
up to three names appears in the display, and Voice SVC prompts
you with "Did you say?" followed by the first name on the list.
Say "Yes" to confirm the name or "No" to hear the next
4.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Choice Lists" on
page 81.)
• To say the name again, press Repeat.
• To exit Voice SVC without dialing, press Settings and press Exit.
The contact information for the name you selected appears
5.
in the display.
• To dial the number associated with the name, press the Send key.
• To remove this entry from your Contacts list, press Erase.
• To add or change information for this entry, press Edit.
• To access the following options, press Options.
– Send Txt Msg: Create and send a text message to the selected
Contact.
– Send Pic Msg: Create and send a picture message to the selected
Contact.
– Call: Dial the number associated with the Contact name.
– Send Name Card Via Bluetooth: Send the select Contact's
information to another Bluetooth device.
Select the desired option.
Understanding Your Contacts 34