Dbk Identification Tables; Analog Output Dbks; Digital I/O Control Dbks - Omega Engineering OMB-DBK-34A User Manual

DBK Identification Tables

Analog Output DBKs

Analog Output
Product
DBK2
DBK5
DBK46

Digital I/O Control DBKs

Digital I/O / Control
Product
DBK20
DBK21
DBK23
DBK24
DBK25
DBK208
DBK210
Notes
Daq Systems
Name/Description
Voltage Output Card
Current Output Card
Analog Output Card option for designated devices
Name/Description
General-Purpose Digital I/O Card (Screw Terminals)
General-Purpose Digital I/O Card (DB37 Connectors)
Optically Isolated Digital-Input Module
Optically Isolated Digital-Output Module
Relay Output Card
Carrier board for Opto-22 Compatible SSR Digital Modules.
Carrier Board for Grayhill 70M-Series Mini-Modules
o
P1, P2, and P3 DB37 connectors do not exist on the DaqBoard/2000 Series boards or /2000c
Series boards, but are obtained by using P4 adapters (DBK200 series boards).
o
For DaqBoard/2000 Series devices, unless otherwise noted, the internal clocks should be set to
100 kHz when used with any of the following DBK options: DBK12, DBK13, DBK15, DBK19,
DBK52, DBK53, and DBK54. See specific DBK section for details.
o
DaqBoard/500 Series boards do not support DBK options.
o
DaqBoard/1000 Series boards do not support DBK options.
o
DaqBook/2000 "AEX" devices have P1, P2, and P3 connectors and, in addition a P4 connector.
967794
Connects To:
I/O
4 channels P1
4 channels P1
4 channels Internal
PC Board
Connects To:
I/O
48 channels P2
48 channels P2
24 channels P2
24 channels P2
8 channels P2
16 Channels P2 or P4
32 Channels P2 or P4, P1 exp.
DBK Basics, pg. 9