Installing Batteries Into The Samsung Smart Control; The Low Battery Alarm Window - Samsung UN32H6350 User Manual

Installing Batteries into the Samsung Smart Control

The Samsung Smart Control is only available with the LED 6400 and 7100 series.
It may not be supported Samsung Smart Control depending on the country.
To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.
1.
Gently pull on the notch in the battery cover. When the cover comes loose, remove the cover
completely.
2.
Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
3.
Place the battery cover on the remote control, and then press the top part of the cover into the
remote control.
4.
Press the catches on both sides of the battery cover in the order shown in the figure above until
the cover is completely attached to the remote control.

The Low Battery Alarm Window

If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen.
When the Alarm appears, replace the batteries. We recommend using alkaline batteries for longer
operating life.
<Low battery Alarm Icon>