Operating The Display - Philips BDM3490UC User Manual

2. Setting up the monitor

2.2 Operating the Display

Description of the control buttons
Press more than 3 seconds to
switch display power OFF. Press
to switch display power ON.
Access the OSD menu.
Confirm the OSD adjustment.
User preference key. Customize
your own preference function
from OSD to become the "user
key".
Adjust the OSD menu.
PiP/PbP/Off/Swap
Adjust the OSD menu.
SmartImage hot key. There
are 7 modes to select: Office,
Photo, Movie, Game, Economy,
SmartUniformity, Off.
Return to previous OSD level.
Customize your own "USER" key
"USER" allows you to setup your favorite
function buttons.
1. Toggle to the right to enter OSD menu
screen.




 
  
 

2. Toggle to the up or down to select main
menu [OSD Settings], then toggle to the
right to confirm.
3. Toggle to the up or down to select [User
Key], then toggle to the right to confirm.
4. Toggle to the up or down to select your
preferred function : [Audio Source],
[Volume], [Input].
5. Toggle to the right to confirm your
selection.
Now you can toggle the button at the bottom
of the Display bezel to the down [User Key]
directly. Only your pre-selected function will
appear for quick access.
5
 

