Samsung DP300A2A-A01US User Manual page 38

Using a wireless keyboard/mouse
If the wireless mouse does not work
► When the power switch at the bottom of the mouse is in the
OFF position, the mouse does not work.
Turn the switch to the ON position.
► Check the batteries.
► Check the status of the wireless signal receiver.
1
Set the power switch at the bottom of the mouse to the OFF
position.
ID button
Power switch
(Optional)
2
Disconnect and then reconnect the wireless signal receiver to
the main body.
3
Set the power switch at the bottom of the mouse to the ON
position.
4
Within 10 seconds of reconnecting the receiver, press and
hold the ID button for 2~3 seconds near the receiver.
Chapter 2.
37
Using the computer