Replacement Guide; Installation - Panasonic Whisper-Lite FV-08VQL4 Service Manual

4. Replacement Guide

INSTALLATION

CAUTION
Disconnect power source before working
on unit.
CAUTION
1. Remove the primary light kit grille.Remove
grille by pulling down one mounting spring.
Then pull down the other mounting spring.
(Squeeze mounting spring and pull down
carefully) (Fig.1)
2. Unfasten 2 screws (ST4.2X16) and 1 machine
screw (M4X8) from fan unit. Hold the lighting
unit, and remove the plug connectors from the
receptacle respectively.(Fig 2)
3. Take out the light lead wire assembly B from
accessories, and connect
assembly B to junction box.(Fig.3)
IMPORTANT:
Remove the tapes from grille and springs before
installing new light kit grille as shown below:
4.Take out the new light kit grille.Remove
screw (M4X8). Remove light kit cover assemby. (Fig.4)
5. Install the night lamp and fluorescent lamps.
(Fig.5)
6. Install light kit cover assembly. (Fig.6)
the light lead wire
Tapes
FFV3420057S
Slot
Glove
Grille
Ceiling
Machine screw
(M4X8)
2 screws(ST4.2X16)
Plug connector
Light lead
wire assy B
Receptacle
Remove screw
(M4X8)
Light cover
Fluorescent
lamp
3
Light kit cover
assembly
Mounting
spring
Fig.1
Receptacle
Plug connector
Lighting unit
Fig.2
Plug connector
Fig.3
Receptacle
Fig.4
Night lamp
Fig.5
Secure screw
(M4X8)
Fig.6
16