There Is A Problem With The Picture; Testing The Picture - Samsung UA40J6300AR E-Manual

There Is a Problem with the Picture

Testing the picture

MENU Support
Before you review the list of problems and solutions below, use
problem is caused by the TV. The
flaws or faults.
The problem
Flickering and
Dimming
Component
Connections/Screen
Colour
Screen Brightness
Ghosting, Blurring, or
Juddering
Unwanted Powering
Off
Problems Powering On
Unable to find a
Channel
Self Diagnosis Picture Test
Picture Test
If your Samsung Television is flickering or dimming sporadically, you may need to
disable some of the energy efficiency features. Disable
System Eco Solution
Solution Eco Sensor).
If the colour on your Samsung television screen is not correct or the black and
white colours are off, run
Picture Test).
If the test results indicate that the problem is not caused by the TV, do the
following:
● Confirm that the TV's video input connectors are connected to the correct
external device video output connectors.
● Check the other connections as well. If the TV is connected to an external
device via a component cable, confirm that the Pb, Pr, and Y jacks are plugged
into their proper connectors.
If the colours on your Samsung TV are correct but just a little too dark or bright,
try adjusting the following settings first.
Picture
● Go to the
Sharpness, Colour, and
If you notice ghosting or blurring on the screen, use the
function(MENU
issue.
If your Samsung TV appears to turn off by itself, try disabling some of the TV's
energy efficiency functions. See if
Timer) has been enabled. The
specified period of time. If the Sleep Timer has not been enabled, see if
Power Off
(MENU
Power Off
(MENU
and disable them.
When the TV is turned on, the remote control receiver flashes 5 times before the
screen turns on.
If you are having problems powering on your Samsung television, there are a
number of things to check before calling the service department. Confirm that the
TV's power cord is connected correctly at both ends and that the remote control
is operating normally. Make sure that the aerial cable or cable TV cable is firmly
connected. If you have a cable/satellite box confirm that it is plugged in and turned
on.
If your TV is not connected to a cable box or satellite box, run
System Setup) or
Try Now
displays a high definition picture you can examine for
Try this!
Energy Saving) or
Picture Test
(MENU
menu and adjust the Backlight, Contrast, Brightness,
Tint (G/R)
settings.
Picture Picture Options
Sleep Timer
Sleep Timer
System Eco Solution
System Eco Solution
Auto Tuning (Broadcasting
Picture Test
to determine if the
Energy Saving
Eco Sensor
(MENU
Support Self Diagnosis
Auto Motion Plus
Auto Motion Plus) to resolve the
System
(MENU
automatically turns the TV off after a
No Signal Power
Auto Power Off) has been enabled
Setup
Auto Tuning).
(MENU
System Eco
Time Sleep
No Signal
Off) or Auto
(MENU