Compact din-rail 21.5 volt regulated power supplies (18 pages)
Summary of Contents for Omega Engineering PSP
Page 1
PSP and PST Series Power Supplies M0252/0707 INSTRUCTION SHEET Shop online at: omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info INTRODUCTION OMEGA ® Power Supplies have outputs ranging from 5 to 28 volts, and from 40 mA to 500 mA (Refer to Tables 1 and 2). All styles feature excellent regulation and ripple parameters, and are short circuit protected.
Page 2
OPERATING INSTRUCTIONS INPUT VOLTAGE: AC input models operate on 105-125 VAC, 47-420 Hz. (Models with an input of 210-250 VAC, 47420 Hz are available on special order). OUTPUT VOLTAGE ADJUSTMENT: Output(s) factory set to within +1% of the nominal output voltage rating. (AC input models having outputs of I to 9 volts, within 2%.) If necessary, outputs can be more precisely calibrated by the use of an external trim resistor connected between the T/C pin and one of the output pins.
Page 3
Figure 2. Dimensions For Screw Terminal Style COMMON POWER SUPPLY SPECIFICATIONS INPUT VOLTAGE: OUTPUT: REGULATION: RIPPLE: OUTPUT VOLTAGE TRIM ADJUSTMENT: POLARITY: AMBIENT OPERATING TEMPERATURE: STORAGE TEMPERATURE: TEMPERATURE COEFFICIENT: From 9 to 75 volts, approximate TC is IMPEDANCE: DIMENSIONS: TABLE 2...
Page 4
FAX: (001) 203-359-7807 It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.