Wearing The External Camera Module; Mounting The External Camera Module On Rubber Mount; 裝載外接式相機模組; 將外接式相機模組裝上塑膠托架 - Samsung VP-X300 Owner's Instruction Book

Using the External Camera Module
ENGLISH
(VP-X300L only) : wearing the External Camera Module
Mounting the External Camera Module on
Rubber Mount
1
1. Set the rubber Mount receptacle of the External Camera
Module to the screw of rubber Mount.
2. Turn the rubber Mount's screw to the right to fasten.
[ Notes ]
✤ Dropping the External Camera Module or bumping it to other
objects may cause device failure. When using the device, you must
attach it to the rubber mount, and be careful not to drop or strike it.
✤ The Recording a movie using the external camera module does
not support anti-shake function.
✤ The [W/T] switch does not operate while you are recording a movie
clip with the External Camera Module.
✤ When you record a movie using the external camera module
connection, setting the [MP3/External Camera Module HOLD]
switch on the Sports Camcorder to hold helps to prevent accidental
operation by locking all button operations except the power button
and volume control.
使用外接式相機模組(僅適用於
Vp-X300L)：使用外接式相機模組錄製
將外接式相機模組裝上塑膠托架
Rubber Mount receptacle
screw
1. 將外接式相機模組的塑膠托架插座裝上塑膠托架的螺絲。
2. 向右轉動塑膠托架螺絲栓緊。
[ 附註 ]
✤ 外接式相機模組掉落地面或遭受撞擊可能造成裝置故障。使用裝置
✤ 使用外部相機模組錄製影片不支援防震動功能。
✤ 當正在用外部相機模組錄製影片剪輯時，[W/T] 開關不能使用。
✤ 使用外部相機模組連接來錄製影片時，將運動攝錄放影機的 [MP3/
2
時，必須裝置於塑膠托架上，並小心不要使其掉落或遭受撞擊。
外部相機模組保持] 開關設定爲保持可鎖定電源按鈕和音量調節之
外的所有按鈕操作，有助於防止意外操作。
93 93