Assembly & Set-Up
Contents of Carton
•
One Pressure Washer
•
One Pressure Washer Operator's Manual
•
One Engine Operator's Manual
Assembly
NOTICE:
This unit is shipped without gasoline or oil in
the engine. Fill up with gasoline and oil as instructed in the
accompanying engine manual BEFORE operating your mower.
NOTICE:
The high-pressure pump was filled with oil at the
factory. Always check oil level before using (refer to Maintenance
& Adjustments for more information).
Handle
1.
Slide the handle assembly onto the frame and secure with
saddle bolts and knobs.
NOTICE:
Risk of personal injury. Avoid placing hands between
handle and frame when assembling to prevent pinching.
Figure 3-1
•
One Handle
•
One High Pressure Hose
•
One Quick-Connect Spray Wand
Nozzles
1.
Remove the colored quick-connect nozzles from the plastic
bag and insert them into correct grommet on the nozzle
holder. Nozzles are color coded to match colored nozzles
on label.
•
One Spray Gun
•
Five Quick-Connect Nozzles
•
One Bottle of Oil
Figure 3-2
3
9