Dry Vacuum Cleaning - Kärcher SE 6.100 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
To eliminate mite, we recommend our
anti-allergenic carpet cleaner RM 772,
with long-term effect.
Do not step on cleaned surfaces until they
have dried and do not place furniture on
them to avoid pressure spots or rust
stains.
Cleaning methods
With light to normal contamination (regu-
lar cleaning):
Turn on suction and spraying.
Spray and simultaneously suction off de-
tergent solution in one work cycle.
Switch off the spray switch and suction off
the remaining cleaning solution.
After cleaning the carpets, reclean them
using clear, warm water and waterproof if
needed.
Heavy soiling or stains (basic cleaning):
Switch on the spray.
Apply detergent solution and soak for 10
to 15 minutes (suction is switched off).
Clean the surface just like you would with
light/normal soiling.
After cleaning the carpets, reclean them
using clear, warm water and waterproof if
needed.

Dry vacuum cleaning

Caution
The reservoir and accessories must be dry to
prevent parts from sticking together.
Remove the wastewater and fresh water
containers.
Illustration
Recommendation: To vacuum fine dust,
use the filter bag.
Illustration
Use the adapter for wet/dry vacuuming At-
tach the adapter to the handle, turn the
locking handle to secure it.
Select the desired accessories and attach
to the spray/suction pipes or directly to the
attachment.
Switch on the vacuum process.
Note: Do not switch on the spray.
Illustration
If the filter cleaning indicator is red:
Downloaded From Vacuum-Manual.com Manuals
16
Change filter bag when vacuuming with a
filter bag.
Repeatedly activate the filter cleaning
mechanism when vacuuming without a fil-
ter bag.
Vacuuming hard surfaces
Illustration
Use your foot to press the reversing
switch of the floor nozzle. The brush strips
at the bottom of the floor nozzle are ex-
tended.
Vacuuming carpeted floors
Illustration
Use your foot to press the reversing
switch of the floor nozzle. The brush strips
at the bottom of the floor nozzle are re-
tracted.
Use the surrounding air separator to
adapt the suction force.
Note: Close the surrounding air separator
again after use!
- 5
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents