Kodak EasyShare M763 Extended User Manual page 57

If...
Stored pictures are
corrupted.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Picture is too light.
Picture is not clear.
Picture is too dark.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Try one or more of the following
I
Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
I
Transfer pictures to the computer (see
in the camera (see page
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Check the image storage location setting
I
Transfer the picture to the computer (see
card in the camera
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Decrease Exposure Compensation (see
I
Turn off the flash, then move back from the subject.
I
Clean the lens (see page
I
Make sure your camera is not in Close-up mode.
I
Move so there is at least 13.8 in. (35 cm) between the camera and the
subject.
I
Place the camera on a flat, steady surface or use a tripod.
I
Turn on the flash (see
I
Move so that the distance between you and the subject is within the
effective flash range
I
Use Fill flash (page
the subject.
I
Increase Exposure Compensation (see
page
35).
(see page 35).
page
61).
page 8).
(see page 59).
8) or change your position so light is not behind
page
Troubleshooting
46), then format the card
(see page 34).
page 46), then format the
37).
37).
51