Part 5 Printing - Casio KL-130 User Manual

Text Effects
There are three text effects that you can assign: shading, underlining, and
boxed text. The following shows examples of each.
Effect Indicator
Shading
Underlining
Boxed Text
The text effect indicators will show you when a text effect is being used.
You can use the Shading, Underline, and Box effects in combination with
each other, and even specify all three at the same time.
To specify a text effect
1. Press FUNC and then
2. Use and to move the pointer to the effect you want to use.
To delete a currently applied effect, select NONE.
3. Press OK to apply the settings and return to the text screen.
To apply multiple effects, repeat the above from step 1.
14 EN
Sample
to display a menu of text effects.
Part 5 Printing
Printing Precautions
Never turn power off while printing is being in progress.
Make sure that the tape outlet is not blocked before you start printing.
Never operate the tape cutter while printing is being in progress (indicated
by the message "NOW PRINTING" on the display).
Important!
Never touch the tape cutter while a tape cut operation is being in progress.
Doing so can result in cuts and other personal injury.
Printing a Tape
Printing a tape is as easy as pressing the
To display the print preview
1. Press FUNC and then .
The print image that appears scrolls on the display for easy viewing.
2. To stop the scrolling, press OK. Press OK again to restart scrolling.
After the preview (scrolling) operation is complete, the tape length
will appear on the display for a short while, and then the display will
automatically return to the screen that was shown before you performed
step 1, above.
To cancel preview part way through, press
To print a tape
1. While the text input screen is displayed, press
This will display the tape length, followed by a screen for specifying the
number of copies.
2. Use and , to specify the number of copies.
You can also input a value for the number of copies.
3. Press OK to start printing.
To stop a print operation that is in progress, press
4. After the print operation is complete, press down on the tape cutter button
to cut the tape.
key.
.
.
.