Table of Contents
Advertisement
4
When the battery is fully charged, first unplug the travel
adapter from the device and then from the power outlet.
Do not remove the battery before removing the travel
adapter. Doing this may cause damage to the device.
To save energy, unplug the travel adapter when not in
use. The travel adapter does not have a power switch,
so you must unplug the travel adapter from the outlet
when not in use to avoid wasting power. The travel
adapter should remain close to the socket when in use.
›
Charge with a USB cable
Before charging, ensure that your PC is turned on.
1
Open the cover of the multifunction jack.
2
Plug one end (micro-USB) of the USB cable into the
multifunction jack.
3
Plug the other end of the USB cable into a USB port on a
PC.
Depending on the type of USB cable you are using, it
may take some time before charging begins.
4
When the battery is fully charged, first unplug the USB
cable from the device and then from the PC.
Assembling
13
Advertisement
Table of Contents
