Table of Contents
Advertisement
To Watch TV programs
You can watch TV programs being
broadcast on the preset channels.
Using the Channel Number buttons
• To select a one-digit channel number:
Press number from among 1-9.
• To select a two-digit channel number:
Press one of the buttons from 1-9 for the decimal position and the next
number from among 0-9.(10-99)
Using CH
/
Press CH
to select lower position numbers; CH
select higher ones. Your TV will change only on the channels
you program into the TV's channel memory.
For how to add channels to TV's memory, see "To preset
channels(AUTO SCAN)" on page 25 for details.
To adjust sound volume
To adjust sound volume, press VOL+/- on the TV
or on the remote control to increase or decrease
respectively.
Using MPX
Press MPX button on the remote control to select a MPX mode:
1. When stereo TV signal is received, press MPX button to shift among:
MONO, NICAM MONO and STEREO.
2. When Mono TV signal is received, press MPX button to shift between:
MONO and NICAM MONO.
3. When dual language TV signal is received, press MPX button to shift
among: MONO, DUAL AB, DUAL A, DUAL B.
To switch between two channels (Channel Return)
The channel return feature allows you to switch between channels
without entering an actual channel number each time.
1. Select the first channel you want to view.
2. Select a second channel using the number buttons.
3. Press FLASHBACK. The previous channel will be displayed.
Pressing FLASHBACK switches the TV between the last two
channels that were selected.
to
VOL+/-
24
Number
buttons
MPX
CH
/
FLASHBACK
Advertisement
Table of Contents
