Bosch DV52J8700E Series User Manual page 27

DV8000J-03170S_EN-US.indd 27
B
A
C
Method2
The dryer must be connected to the cold
water faucet using the new inlet hoses. Do
not use old hoses. (long hose : Canada model
only supplied)
1. If the "Y" connector (A) cannot be
attached directly to the cold water
faucet, the short hose must be used.
2. Turn the cold water faucet off.
3. Attach the short inlet hose (B) to the
cold water faucet.
Screw on the coupling by hand until it is
seated on the faucet.
4. Using pliers, tighten the coupling with
an additional two-thirds turn.
NOTE
Do not overtighten, as it may damage the
coupling.
English 27
2015/4/20 14:38:22