Canon PowerShot SX400 IS User Manual page 99

Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted
( = 2).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card's user
manual or contact the manufacturer for instructions on preparing and
using cards or resolving transfer problems.
● When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-
Fi trans.] is set to [Disable] ( = 100). Remove the Eye-Fi
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card
and computer settings. For details, refer to the card's user
manual.
- Poor Eye-Fi connections may cause image transfer to take a
long time, and transfer may be interrupted in some cases.
- Eye-Fi cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
Downloaded From camera-usermanual.com Canon Manuals
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen
(in simple information display mode).
Still Images Movies
*1
*2
Images labeled with a [
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
Not connected
(Gray)
(Blinking white) Connecting
Connected
(White)
Transfer in progress*
(Animated)
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
Power saving ( = 23) on the camera is temporarily disabled during image
transfer.
Restart the camera. Repeated display of this icon may indicate a problem with
the card.
] icon have been transferred.
● Press the [
Fi Settings] on the [
press the [ ] button.
● Choose [Connection info], and then press
the [ ] button.
● The connection information screen is
displayed.
Before Use
Basic Guide
Advanced Guide
1
1
2
3
2
4
5
6
7
8
] button, choose [Eye-
Index
] tab, and then
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
99