Port Triggering - D-Link DSL-2730U User Manual

Section 3 – Web Configuration

Port Triggering

Choose ADVANCED > Port Triggering. The page shown as the figure appears
on the right.
Click the Usual Application Name drop-down menu to choose the application
you want to setup for port triggering. When you have chosen an application the
default Trigger settings will populate the table below.
If the application you want to setup isn't listed, click the User-defined Application
Name radio button and type in a name for the trigger in the Custom application
field. Configure the Start Match Port, End Match Port, Trigger Protocol, Start
Relate Port, End Relate Port, Open Protocol and Nat type settings for the port
trigger you want to configure.
When you have finished, click the Apply changes button.
D-Link DSL-2730U User Manual 38