When installing: When attaching the system board to the base cover, adjust the placement of the USB ports
as shown in
a
, and make sure that they are attached to the holes on the base cover as shown. Improper
placement of those jacks might cause a damage.
1080 Speaker assembly
For access, remove these FRUs in order:
•
"1010 Base cover assembly" on page 52
•
"1020 Battery pack" on page 53
•
"1030 Hard disk drive or solid-state hybrid drive" on page 54
•
"1040 Memory module" on page 55
•
"1050 Wireless-LAN /Bluetooth card" on page 57
•
"1060 Thermal fan assembly and Heat Sink assembly" on page 59
•
"1070 System board" on page 60
Removal steps of the speaker assembly
Loosen four screws
1
and remove the speakers
Step
Screw (quantity)
1
M2 × 2mm, big head, nylon-coated (4)
62
Hardware Maintenance Manual
a
a
2
.
a
a
a
a
Color
Black
Torque
1.85 +/- 0.15kgf-cm