Chapter 2. Installing The Dock; Connecting The Dock To Your Notebook Computer; Installing The Device Driver On Windows Operating Systems - Lenovo ThinkPad OneLink+ Dock User Manual

Chapter 2. Installing the dock

This chapter provides instructions on how to connect the dock to your notebook computer, manually install
the device driver, and install update packages through the System Update program.

Connecting the dock to your notebook computer

This topic provides instructions on how to connect the dock to your notebook computer using the OneLink+
cable along with the power adapter and power cord.
Note: Ensure that you correctly connect the dock to an ac power source.
To connect the dock to your notebook computer, do the following:
1. Connect the power adapter to the power cord
2. Connect the dc-in connector of the power adapter to the power connector on the dock
Note: It is recommended to use the 90 W power adapter that comes with the dock.
3. Connect the OneLink+ cable to the Lenovo
4. Connect the power plug of the power cord to an electrical outlet
Figure 2. Connecting the dock to the power supply and your notebook computer

Installing the device driver on Windows operating systems

The Lenovo notebook computer with OneLink+ connector has the dock device driver preinstalled. In this
situation, the dock is ready for use after you successfully connect it to an ac power source and your notebook
computer. For the detailed computer model information, go to http://www.lenovo.com/support/docks
and click ThinkPad OneLink+ Dock.
© Copyright Lenovo 2015
1 .
®
OneLink+ connector on your notebook computer
4
2 .
. The dock is ready for use.
3
.
5