Table of Contents
Advertisement
Printing with a PictBridge-compatible printer
Changing the paper settings
You can change the settings of the printing paper.
Normally, the settings of the printing paper follow the STANDARD settings of your printer.
Printing in the "PRINT"/"PRINT ALL"
/"INDEX PRINT" mode
PAPER
SIZE
STANDARD
L
210mmRoll
• SIZE
The paper size setting value differs depending on the printer.
• BORDER
– STANDARD: prints according to the settings of your printer.
– NO: prints to the edges of the paper.
– YES: prints with borders.
• PHOTOS PER SHEET
The setting value differs depending on the selected paper size and the printer.
Touch the desired settings on each screen above. Touch
the settings.
Tip
If you change the paper settings, these changes will be kept until you finish direct printing.
Next time you connect your m:robe to the printer, the paper size settings will be the STANDARD settings.
92
/
BORDER
STANDARD
NO
YES
Printing in the "MULTI PRINT" mode
PAPER
SIZE
/ PHOTOS PER SHEET
STANDARD
MAX
L
MIN
210mmRoll
to return to the "PRINT" screen and to complete
Advertisement
Table of Contents
