Setting The Handset; Quick Access To Functions - Siemens Gigaset C470 Manual

Activating the room monitor and
entering the number to be called
¢ ¢
v í
Room Monitor
¤
Change multiple line input:
Room M.:
Select On to activate.
Call to:
Press the display key
tination number.
External number: Select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number:
handset or Call All
sets are to be called)
Store number with
Level:
Set noise level sensitivity
¤
Save the changes.
Changing a set external destination
number
¢ ¢
v í
Room Monitor
s
Scroll to the
Press the display key.
§Edit§
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 45).
¤
Save changes (page 59).
Changing a set internal destination
number
¢ ¢
v í
Room Monitor
s
Scroll to the
Press the display key.
§Delete§
Press the display key.
§Edit§
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 45).
¤
Save the changes.
and enter des-
§Edit§
¢
s (Select
§INT§
if all registered hand-
¢
.
§OK§
.
§Save§
(Low or High).
Call to: line.
line.
Call to:
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with (page 45).
§Save§

Setting the handset

Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.

Quick access to functions

The display keys have a function preset by
default. You can change the function
assigned.
To start the function, you then simply
need to press the button.
Changing display key assignments
¤
Press and hold the left or right display
key.
The list of possible key assignments is
opened. The following can be selected:
INT
Internal calls (see page 42).
SMS
Assign the menu for SMS functions to a
key (see page 25).
Setting the handset
on the handset.
§OFF§
45