Attach Network Cables - HP Series 200 Installation Manual

Installation
Phase 3: Prepare the Router Hardware
C. Attach Network Cables
Depending on the model of router and the physical connections in your
network, you will use one or more of the following interface options:
AUI (page 1-12)
BNC (page 1-14)
Token Ring (page 1-16)
FDDI (page 1-17)
WAN (page 1-21)
C a u t i o n
Static discharge may damage equipment. Do not touch the router
connector pins or the cable connector pins.
N o t e
On routers providing an AUI interface and a BNC interface for the same
LAN 802.3 port, you can use either interface at any time, but not both at
the same time. For information on the operation of the green LEDs
indicating AUI or BNC interface selection, refer to ''AUI and BNC
(green) LEDs'' on page 2-10.
1-11