Removing the Upper Cover
IMPORTANT: The TouchPad is supplied as part of the Upper Cover. If the TouchPad is defective, replace the entire
Upper Cover.
See "Removing the LCD Module" on page 57.
1.
Turn the computer over. Remove the eighteen screws on the bottom panel.
2.
Step
Upper Cover
Turn the computer over and disconnect the following cables from the Mainboard.
3.
NOTE: Avoid pulling on cables directly to prevent damage to the connectors.
NOTE: Use the pull-tabs on FFC cables whenever available to prevent damage.
60
Size
M2.5*5
A
B
Quantity
18
Screw Type
C
Chapter 3