Remote Control - Panasonic CS-S9MKR Operating Instructions Manual

Table of Contents

Advertisement

8
TO REACH TEMPERATURE QUICKLY
• This operation will stop automatically
after 20 minutes.
9
TO ENJOY QUIET OPERATION
• This operation reduces airfl ow noises.
Press and hold for 5 seconds to dim or restore the
10
unit's indicator brightness.
Press and hold for approximately 10 seconds to
11
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
12
Not used in normal operations.
13
NOTES
NOTES
POWERFUL
,
,
ECONOMY
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
,
POWERFUL
,
ECONOMY
• Cannot be selected at the same time.
INFORMATION
FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling operation. After 15 minutes of
operation, it is normal to have the following temperature difference between
air inlet and air outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE
• Turn off the power supply and unplug.
• Remove the remote control batteries.
F568153-YS0611-1_EN.indd 5
F568153-YS0611-1_EN.indd 5
• 2 sets of ON and OFF timers are available to turn ON
POWERFUL
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
1
QUIET/ECONOMY
OFF
Select ON or OFF timer
• Example of application at living room:
Morning: ON
Evening: ON
• To cancel ON or OFF timer, press
select respective
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
to select respective
OFF
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
TO SET THE TIMER
TO SET THE TIMER
Cancel
2
Cancel
Set the
time
at 07:00 (Wake up)
OFF
at 08:00 (Out for work)
at 17:00 (Back home)
OFF
at 22:00 (Sleep)
ON
or
then press
or
then press
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG
then please consult authorized dealer under the
following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote
control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
SET
3
Confi rm
or
to
OFF
.
CANCEL
or
ON
.
SET
5
21-Jun-11 10:53:18 AM
21-Jun-11 10:53:18 AM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents