Table of Contents
Advertisement
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
b
Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
c
Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the
monitor and the other end to the computer's port.
d
HDMI Cable (Only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
Or connect MHL cable(Only for MHL-Input Model)(Optional)
to the portable device.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
3
Connect the
USB Cable(Optional)
Connect the
USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
4
and the line-out port on the computer with the audio cable.
5
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
6
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
USB3.0 port
-supporting fast charge
£¨USB3.0 port
(
)
USB
9
Advertisement
Table of Contents
