Service Information; Specifications - Black & Decker HP12 Instruction Manual

PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and
authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or
visit us at www.BlackandDecker-la.com
BATTERIES
BLACK+DECKER batteries can be recharged
many times. At the end of their useful life, discard
batteries with due care for our environment:
f Run the battery down completely, then remove it from
the tool.
f NiCd, NiMH and Li-Ion batteries are recyclable.
Take them to any authorized repair agent or a local
recycling station.

SPECIFICATIONS

Voltaje
No-load speed
Torque
Chuck
Max. drilling capacity
Metals
Concrete
Wood
Drill cuck capacity
Keyless chuck
No. of torque settings
Reversible/electronic
Weight
CHARGER
Output voltage
Input voltage
AR, B2C
B3
BR
Current
Approximate charge time
Weight
BATTERY
Voltage
Capacity
Type
* Maximum initial battery pack voltage
(measured without a workload) is 12 volts.
Nominal voltage is 10,8V.
ENGLISH • 19
HP12
12 V MAX*
0 - 400/min (rpm)
0 - 1400/min (rpm)
25Nm (18,4 ft-lb)
3/8" (10mm)
3/8" (10mm)
5/16" (8mm)
1" (25mm)
1/32" - 3/8" (1mm - 10mm)
Yes
20 + 3
Yes
1,05kg (2,3lb)
14 V
220V ~ 50Hz
120V ~ 60Hz
127V/220V ~ 60Hz
370 mA
3 - 5hr
0,26kg (0,6lb)
12 V MAX*
1,5Ah
Lithium-Ion