Table of Contents
Advertisement
HOLD FUNCTION (page 28)
To avoid operations by accidentally pressing the buttons, use the
hold function.
Remote Control Unit:
To put the unit in the malfunction prevention state, move the
switch in the direction of the arrow.
HOLD
To cancel the HOLD mode, return the
position.
Main Unit:
Press the
button for 2 seconds or more.
You will hear one beep.
Then "HLD on" will appear on the remote control.
To cancel the HOLD mode, press the
more.
You will hear two beeps.
Then "HLDoff" will appear on the remote control.
USEFUL FEATURES (pages 29-32)
Using with the AC adaptor
1. Plug the AC adaptor into an AC outlet (AC 100V) and plug the
other end into the DC IN 5V jack on the battery charger.
2. Place the main unit on the battery charger, with its front toward you.
Using with the alkaline battery
1. Open the battery case supplied with the unit.
2. Insert the AA size battery [LR6] into the battery case by
matching its plus and minus terminals to the diagram in the
battery case, and then close the battery case.
3. Align the protuberance on the battery case with the indenta-
tion on the side of the unit.
4. Turn the fixing screw on the battery case toward the word "LOCK",
and then make sure that the battery case does not move.
Do not insert a rechargeable battery (such as nickel-cadmium
rechargeable battery) into the battery case.
switch to its original
HOLD
button for 2 seconds or
To change the initial setup
1. Insert a MiniDisc.
2. Press the
M
button on the remote control while the MiniDisc is
stopped.
"SET UP" appears in the first line, and "OK?" in the second line
of the display.
3. Press the
M
button on the remote control again.
4. Move the
M
button toward
press the
M
button on the remote control.
5. Move the
M
button toward
press the
M
button on the remote control.
Menu
Beep sound
Auto play
Auto power save
Operation indicator
Backlight on the remote control
Display on the remote control
"N (NORM)"
Operation indicator
Indication lamp is flashing.
Backlight on the remote control
Lit for approx. 10 seconds when operated.
Display on the remote control
Indicated
"A (ALL)"
Operation indicator
Indication lamp is lit.
Backlight on the remote control
Lit for approx. 10 seconds when operated.
(Lit when operated on the battery charger.)
Display on the remote control
Indicated
"O (OFF)"
Operation indicator
Lit for approx. 10 seconds when operated.
Backlight on the remote control
Lit for approx. 10 seconds when operated.
Display on the remote control
Indicated for approx. 10 seconds when
Setting is completed and the initial display appears.
Previous display appears by pressing the
the remote control.
To cancel the setup, move the
or
to select the menu and
or
to select the items and
Item
YES
NO
See below.
operated.
button on
M
button toward
.
MD-ST770
47
Advertisement
Table of Contents
