Table of Contents
Advertisement
Life of the Print Head (MPH-70)
Head (MPH-70) is a consumable part and is user
replaceable.
Length of life : 10 million dots/pin
The machine will automatically switch pins once it reaches it's useful
life.
You can print approx. 3600 plates per head. (Printing area: 30mm x
23mm, Duty Cycle: 35%)
You can check the status of each pin using the MPX-70 Head
Manager.
Note: Life of the pins depend on the hardness of the material.
Pin breakage:
Printing off the edge of the material can cause the pin to break.
We recommend using templates or adding a margin of 1mm or more to
the material.
Normal printing
Printing off the
edge or over a
material
hole.
(based on plated brass material)
Move direction
material
Advertisement
Table of Contents
