Philips mcd909 User Manual page 14

Option 2: connect composite video
cable
1
Connect the supplied composite video
cable to:
• the VIDEO OUT socket on this unit.
• the video input socket on the TV.
Option 3: connect component video
cables
Note
• The progressive scan video quality is only
available when a progressive scan TV is
connected.
• If your TV does not support progressive scan,
you cannot view the picture.
•
For how to activate progressive scan on your
TV, refer to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
TV
TV
Pr/Cr Pb/Cb Y
COMPONENT VIDEO IN PUT
1
Connect component video cables (red/
blue/green - not supplied) to:
• the VIDEO OUT (Pr/Cr Pb/Cb Y)
sockets on this unit.
• the component input sockets on the
TV.
Option 4: connect HDMI cable
Connect HDMI (High Definition Muiltimedia
Interface), DVI (Digital Visual Interface), or
HDCP (High-bandwidth Digital Contents
Protection)-compliant TVs through HDMI
for the best picture quality. This connection
transmits both video and audio signals.
Through this connection, you can watch DVDs
that contain HD (High-Definition) content.
Note
•
Some TVs do not support HDMI audio
transmission.
1
Connect an HDMI cable (not supplied)
to:
• the HDMI socket on this unit.
• the HDMI socket on the TV.
Note
•
If your TV has only a DVI connection, connect
through a HDMI/DVI adaptor. An extra
audio connection is needed to complete this
connection.
TV
HDMI IN
EN 15