Wps(Pbc) Network Setup - Samsung ME40A User Manual

8
13
14
15
16
17

8.1.5 WPS(PBC) Network Setup

How to set up using WPS(PBC)
If your router has a
1
2
3
4
Downloaded From TV-Manual.com Manuals
Network
Repeat the entry process for each field in the
If you make a mistake when entering a number, re-enter the number to correct it. You can also
press the or button to change the number one unit at a time.
When done entering the IP
Press the button to go to the
Repeat the same entry process for
When done, select OK at the bottom of the page, and then press [
screen appears and the verification process starts. When the connection has been verified, the
"Internet is connected successfully." message appears.
WPS(PBC)
Go to Network Setting screen.
Select WPS(PBC), press [
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires all
the network setting values it needs and connects to your network.
The network connection screen appears, and network setup is done.
IP Address.
Address, press [ ].
Subnet Mask fields, and then press [
Subnet Mask, Gateway, and
button, follow these steps.
], and then press [ ] again.
].
DNS Server.
]. The network connection
8 Network
145