Mazda CX-3 Manual page 340

Interior Features
Bluetooth
®
4. Turn the audio control dial to select the
name of the device you would like to
link.
5. Press the audio control dial to select the
device you would like to link. The
symbol disappears, and " PAIRING "
ashes in the audio display.
NOTE
When " GO BACK " is selected and the
audio control dial is pressed, the display
returns to " LINK CHANGE ".
6. If the link to the desired device is
successful, the
again, together with " LINK
CHANGED ". " LINK CHANGED " is
displayed for three seconds, then it
returns to the normal display.
5–82
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
symbol is displayed
NOTE
Some Bluetooth
®
certain amount of time before the
symbol is displayed.
If a hands-free type mobile phone has
been the most recently paired device,
the Bluetooth unit links this device.
®
If you would like to use a Bluetooth
audio type device which has been
previously paired to the Bluetooth
the link must be changed to this device.
If an error occurs while trying to link
a device, " Err " ashes in the audio
display for three seconds, and the
display returns to " LINK CHANGE ".
If this occurs, check the pairing status
of the Bluetooth
®
location of the device in the vehicle
(not in the luggage compartment or a
metal-type box), and then try the link
operation again.
Device selection can also be done using
voice recognition.
How to con rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed rst is the
device which is currently linked.
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP "mode. (Refer to
"Bluetooth audio device set-up" for
®
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the rst device among the
paired devices is displayed.
audio devices need a
®
unit,
®
audio device and the
® audio