Level 3 Repair
8-3-2. Power on - CP Power
CP Power on does not work
YES
No
After SW D/L,
Check the Setting-About device-
recheck the Baseband version &
Baseband version
if the reproducing, PBA is change.
Yes
No
Check U802 power stage
C837 = 1.1V, C838 = 1.3V,
Check the U701 circuit
C839 = 1.8V, C831 = 1.8V
& Replace U701
C832 = 2.85V
Yes
No
Check the R815,U806 circuit
MDM_PS_HOLD = 1.8V
& replace U806
Yes
No
Check the U600 circuit
Check U600 power stage
& replace U600
C607 = 1.1V
Yes
Check the UCP600 state
8-9
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.