How To Connect The Drain Hose (Applicable Models Only) - Samsung WA85H4000H User Manual

Table of Contents

Advertisement

Available languages

Available languages

installation & maintenance

HOW TO CONNECT THE DRAIN HOSE (APPLICABLE MODELS ONLY)

IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and connect the
outlet-hose. (option)
Be sure to join tightly the drain hose into the
drain-outlet on the side of the machine.
IN CASE OF GENERAL WASHER (APPLICABLE MODELS ONLY)
1. After pressing the joint ring, insert to the drain hose.
2. After directing the drain hose to a drain, join to the
drainoutlet of the washing machine.
3. Be sure to join them tightly by pressing the joint ring and
pushing it into the drain-outlet.
The length of drain hose is adjustable so that you can
extend the length appropriately.
HOW TO
(APPLICABLE MODELS ONLY)
The handle of joint ring is pressed to pull out the drain hose.
Change the direction of the drain hose and follow the above
guideline again.
WA85H4000H_03218F_EN.indd Sec6:18
WA85H4000H_03218F_EN.indd Sec6:18
cap-hose
CHANGE THE DRAIN HOSE DIRECTION
English - 18
Be sure to join tightly the drain hose into the
drainoutlet on the back of the machine.
Drain hose
Hose guide
Install the drain hose in the position of about
90~100 cm above the ground. The end of the
drain hose can not be sinked under water.
drain-outlet
2014-07-18
2014-07-18
2:29:16
2:29:16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents