Kodak EASYSHARE M5350 Extended User Manual page 53

Status
Cannot find the
desired picture/video
Computer/connectivity
Status
Computer does not
communicate with
the camera
Direct printing (PICTBRIDGE enabled Printer)
Status
Cannot print
Picture quality
Status
Picture is not clear
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Solution
■
To view pictures on a card or in internal memory,
Solution
■
Turn off the camera, then turn it back on.
■
Make sure the battery is charged and installed correctly
page 1).
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Downloads at
www.kodak.com/go/camerasw.
Solution
■
The camera must be in PTP (not mass storage) mode. Change the
Computer Connection setting (in the Settings menu) to Other
Application (see page
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures
41).
51).
(see page 40).
(see page 17).
Troubleshooting
see page 20.
(see
(see page 43). Then
47