Table of Contents
Advertisement
If...
Picture is not clear
Direct printing (PictBridge) problems
Status
Cannot locate desired picture.
The Direct print menu display
turns off.
Cannot print pictures.
Camera or printer display an
error message.
Still having problems?
Visit www.kodak.com/go/p880support, or see
For Direct printing issues, contact the printer manufacturer.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Try one or more of the following
■
To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AE/AF indicator turns green, press
the Shutter button completely down to take the picture.
■
Clean the lens
(page
■
Make sure camera is not in Macro AF mode if you are outside of the
Macro AF setting or the Flower and Close-up mode specifications.
■
Make sure camera is not in Telephoto mode if you are closer than the
telephoto focus specification.
■
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
Solution
■
Use the Direct print menu to change the image storage
location.
■
Press any button to redisplay the menu.
■
Ensure that there is a connection between the camera
and printer
■
Ensure the printer and camera have power
■
Follow the prompts to resolve the issue.
88).
(page
21).
page
75.
Troubleshooting
(page
21).
74
Advertisement
Table of Contents
