Specifications - Sony DVP-S525D Operating Instructions Manual

Specifications

CD/DVD player
Laser
Semiconductor laser
Signal format system
PAL/(NTSC)
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (LINE OUT (AUDIO 1, 2)
connectors only)
Harmonic distortion
Less than 0.0025%
Dynamic range
More than 100 dB (DVD)
More than 98 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Jack
type
Phono
LINE OUT
jacks
(AUDIO 1, 2)
DIGITAL OUT Optical
(OPTICAL) output
connector
Phono
DIGITAL OUT
jack
(COAXIAL)
Phono
LINE OUT
(VIDEO 1, 2) jacks
4-pin
S VIDEO OUT
mini DIN
(1, 2)
COMPONENT Phono
jacks
VIDEO OUT
(Y, C /B-Y,
B
C /R-Y)
R
Phone
PHONES
jack
Phono
5.1CH
jacks
OUTPUT
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Output Load impedance
level
2 Vrms Over 10 kilohms
(at 50 kilohms)
–18 dBm Wave length: 660 nm
0.5 Vp-p 75 ohms terminated
1.0 Vp-p 75 ohms,
sync negative
Y: 1.0 Vp-p 75 ohms,
sync negative
C: 0.3 Vp-p 75 ohms terminated
(PAL)
0.286 Vp-p
(NTSC)
Y: 1.0 Vp-p 75 ohms,
sync negative
C /B-Y,
B
C /R-Y:
R
0.7 Vp-p 75 ohms
12 mW 32 ohms
2 Vrms Over 10 kilohms
(at 50 kilohms)
General
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
17 W
Dimensions (approx.)
430 × 95 × 305 mm (w/h/d)
incl. projecting parts
Mass (approx.)
3.4 kg
Operating temperature
5 ˚C to 35 ˚C
Operating humidity
5 % to 90 %
Supplied accessories
See page 7.
* The signals from LINE OUT (AUDIO 1, 2) connectors and 5.1 ch
L,R connectors are measured. When you play the PCM sound tracks
with 96 kHz sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz
(sampling frequency).
Design and specifications are subject to change without notice.
59