Brake Pedal - Yamaha YDRE Owner's/Operator's Manual

MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
7-19
Before performing wheel or brake
maintenance, verify that the main
switch is in the "OFF" position.
Accidental starting of the vehicle
could cause the vehicle to move,
causing death or serious personal
injury.
Wheel Replacement
To remove and install a wheel on
your PTV:
1. With the wheels blocked to
prevent the PTV from moving,
loosen the wheel nuts.
2. Elevate the PTV with a jack and
Y-57
remove the wheel nuts and the
wheel.
3. Reverse the removal steps when
installing the wheel.
Wheel nut tightening torque:
80 Nm, 8.0 m . kg (58 ft . lb)
Brake Adjustment
The brakes on your PTV are self-
adjusting.
Before you operate the PTV, press
down on the brake pedal several
times to make sure the brakes are
functioning properly.
JC1