Motorola GP1280 User Manual page 24

6 After the call is set-up, press PTT button and
talk with your mouth 2.5-5 cm from micro-
phone. Release PTT to listen.
7
When finished with call.
8 CLEAR BUTTON or
x or
*#
Tone A sounds
If a contact list number is selected but no call
request is sent, the display is held until tone H
sounds and then reverts to the IDLE STATE.
When the number is displayed it may be edited
as described in the Keypad Edit section.
Modifying the Contact List
You can modify the Contact List in three ways:
1. Add an entry
2. Delete an entry
3. Edit an existing entry
Note: The radio cannot receive any calls while you
are modifying the contact list.
English 22
To Add an Entry
Call Ended
c
1
to enter Menu Mode.
m
2
until:
c
3
to select:
You will see:
4 Use the keypad to enter the name (see pages
7 and 8). A maximum of 14 characters is
allowed.
c
5
to store the name.
You will see:
6 Use the keypad to enter the number (see
pages 7 and 8). A maximum of 20 digits is
allowed.
c
7
to store the number.
You will see:
If you make an error, use the d key to
8
delete the last character/digit and the
key to create a space.
Add Contact
Add Contact
Name?
Number?
Add Contact
f