Auto Playback; Erasing All Images - Olympus C-2/D-230 Basic Manual

AUTO PLAYBACK

You can view images stored on the card automatically in their stored order
as a "slide show". This function is useful when you want to view images in
sequence.
1 Close the lens barrier and press the
The camera turns on in the Play mode.
2 Press the
En
The monitor shows the Play menu.
3 Select [PLAY] using the
4 Select [
5 Select [START] using the
Auto Playback starts by displaying each image for 3 seconds.
To cancel Auto playback, press the
exit the menu.
• If you display the Play menu while the monitor shows a movie, [
Note
instead of [
displayed.
• If the camera is powered by the batteries on the Auto Playback mode, it will
turn off automatically if left unoperated for about 30 minutes.

ERASING ALL IMAGES

1 Close the lens barrier and press the
The camera turns on in the Play mode.
2 Press the
The monitor shows the Play menu.
3 Select [SETUP] using the
4 Select [
5 Select [
button.
6 Select [
button.
All the images are erased.
• Protected images can not be erased.
• If a write protect seal is attached to the SmartMedia card, the images on the
Caution
card can not be erased.
• Erased images can not be restored. Check each image before erasing to avoid
accidentally erasing images you want to keep.
22
En
button.
/
] using the /
/
]. Auto playback can only be started when a still picture is
button.
] using the /
ALL ERASE] using the
ALL ERASE] using the
button.
buttons and press the
buttons and press the
buttons and press the
button. Press the
button.
/ buttons and press the
buttons and press the
/ buttons and press the
/ buttons to and press the
button.
button.
button.
button again to
] appears
button.
button.