Related Manuals for Philips 32PHT5109
Summary of Contents for Philips 32PHT5109
- Page 1 Register your product and get support at www.philips.com/welcome 32PHT5109 40PFT5109 50PFT5109 User manual...
-
Page 3: Table Of Contents
Contents 7 TV connections Rear connections Side connections Connecting to a computer Use Philips EasyLink 1 Caution 8 Product information 2 Important Display resolutions Safety Multimedia Sound power Inherent resolution 3 Your TV Tuner / Reception / Transmission Remote Control... -
Page 4: Caution
Errors reported to Philips will be adapted and Refit the fuse cover. published on the Philips support website as Copyright soon as possible. -
Page 5: Important
TV. If liquids are spilt on or wall mounting that results in accident, into the TV, disconnect the TV from the injury or damage. power outlet immediately. Contact Philips • If you need to store the TV, disassemble Consumer Care to have the TV checked the stand from the TV. -
Page 6: Screen Care
Risk of overheating! Recycling • Never install the TV in a confined space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of injury, fire or power cord damage! Your product is designed and manufactured •... -
Page 7: Your Tv
3 Your TV Remote Control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. Control Panel a Volume-: Without the key menu, the volume-down function is available. -
Page 8: Remote Control Usage
Remote control usage (Home) Access or exit from the main menu and return to the previous menu. When you use the remote control, hold it close to the TV and point it at the remote control INFO sensor. Make sure that the line-of-sight between Display information about current activity. -
Page 9: Use Your Tv
4 Use your TV Switch channels This section helps you perform basic TV operations. Switch TV on or off Standby indicator • Press CH +/- on the remote control or the lower right part of the TV. • Enter a channel number using the numeric buttons on the remote control. -
Page 10: Adjust Tv Volume
Watch connected devices Adjust TV volume Note • Switch on the device before selecting it as an external signal source. Use the Source button SOURCE. Press » The source list appears. Press to select a device. To increase or decrease volume Press OK to select. -
Page 11: Other Uses Of The Tv
5 Other uses of Adjusting the picture setup the TV ADJUST and select [Picture]. Press » Displays the [Picture] menu. Press Selecting/adjusting setup: [Smart picture]: • [Standard]: Normal picture • setup. Recommended for home Accessing the TV menu entertainment use. [Eco]: Decreases the intensity of •... -
Page 12: Adjusting Setup
Adjusting setup [Dynamic Contrast]: Sets the contrast • to maximum. (There are no advanced contrast functions in PC mode.) Press ADJUST and select [Setup]. [Dynamic Backlight]: The contrast • » Displays the [Setup] menu. level will change with the brightness of the image. -
Page 13: Use Timer
Use timer Changing picture format Press ADJUST and select [Settings]. You can set the timer to switch the TV to standby mode at a set time. select [Picture Format]. Press to Select a picture format. Press OK to confirm. • Before using the timer, please set the sleep timer. -
Page 14: Adjusting Vga Setup
Playing media from USB devices Repeat this step to lock or unlock multiple channels. • [Channel Lock]: When channels are If you have photos, music or video files stored locked: on a USB storage device, you can play the files •... -
Page 15: Updating The Tv Software
Updating the TV software (Home) and When playing back music, press select one of the following options, then press Philips constantly strives to improve its products, so we recommend that you update your • : Play or Pause. TV software whenever an update becomes •... -
Page 16: Restoring The Factory Setup
Restoring the factory setup You can restore your TV’s default picture and sound setup. Saved channel setup will not be affected. ADJUST. Press Select [Settings] > [Reset]. Press to Select [Confirm] and press OK. If you want to cancel, please select [Cancel] and press OK. -
Page 17: Setting Up Channels
6 Setting up Select [Start frequency (MHz) / End Frequency (MHz)] and use the number keys channels to enter the three-digit channel frequencies. Select [Start Search] and press OK. (Home) Exit. Press This chapter explains how to reconfigure and Swapping channels fine-tune channels. -
Page 18: Tv Connections
7 TV connections b AV input This chapter explains how to connect devices with different interfaces. Video Note • You can use different connection types to connect devices to the TV. Rear connections a Component signal input Audio and video input from DVD players, game consoles and other analog or digital Y / AV devices... -
Page 19: Side Connections
e SPDIF c USB Transmit sound to digital audio signal, then Data input from a USB storage device. connected audio device can play digital audio sound. SPDIF Side connections a Headphones q Stereo sound output for headphones. Note • The TV speakers will automatically be muted when headphones are plugged in. -
Page 20: Connecting To A Computer
Connecting to a computer • HDMI cable and HDMI-DVI adapter Before connecting the computer to the TV: • Set the computer screen refresh rate to 60Hz. AUDIO • Select a supported resolution on the computer. Connect to the computer using one of the following connections: Notes •... -
Page 21: Use Philips Easylink
HDMI-CEC-compatible devices connected with Notes an HDMI connection can be controlled using • If you do not want to use Philips EasyLink, please do not the TV remote control. turn this function on. If you want to turn Philips EasyLink on, you must: •... -
Page 22: Product Information
8 Product Sound power information • 32PHT5109: 5W x 2 • 40PFT5109: 8W x 2 • 50PFT5109: 8W x 2 Product information is subject to change without Inherent resolution notice. For detailed product information, please visit www.philips.com/support. • 32PHT5109: 1366 x 768 •... -
Page 23: Supported Tv Mounts
Supported TV mounts To mount the TV, please purchase a Philips TV mount or any TV mount compliant with the VESA standard. To prevent damage to cables and connectors, be sure to leave a clearance gap of at least 2.2 inches or 5.5cm between the back of the TV to the wall. -
Page 24: Troubleshooting
If the light • Check that the picture settings are continues to blink, please contact Philips correctly set. Customer Care Centre. The TV did not save your picture settings: You forgot the code to unlock the TV lock feature •... -
Page 25: Hdmi Connection Issues
Please make a note of your TV model and serial number • If the TV does not recognise the HDMI before you contact Philips Customer Service Centre. device and no picture is displayed, please try These numbers are printed on the back/bottom of the TV and on the packaging. - Page 26 Environmental Protection Use Period This logo labelled on the product itself indicates that the Environmental Protection Use Period thereof is 10 years. The Environmental Protection Use Period of electrical information products refers to the time period during which the toxic and hazardous substances or elements contained within the product will not leak or suddenly spoil, and users of such products will not cause any serious environmental pollution or serious damage to human and property.
- Page 27 © 2014 TP Vision Europe B.V. All rights reserved. Document order number: Philips and the Philips' shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.