Troubleshooting - Canon PowerShot S30 User Manual

Troubleshooting

Problem
Camera will
not operate
Camera will
not record
Lens will not
retract
Downloaded From camera-usermanual.com
144
Appendices
Cause
Power is not turned on
CF card slot/battery cover
opened
Insufficient battery volatge
Poor contact between
camera and battery
terminals
Camera is in replaying or
computer/printer mode
Flash is charging (flashing
orange indicator)
CF card full
CF card not formatted
correctly
CF card slot/battery cover
opened with camera on
CF card slot/battery cover
opened while camera was
recording to CF card
(warning signal)
Switched to replaying mode
from shooting mode
• Turn on the camera.
(p. 27).
• Confirm that the CF card slot/battery cover is securely
closed.
• Fully charge the battery or use a household power
source.
• Wipe the terminals with a clean, dry cloth.
• Switch the camera to Shooting mode.
See Switching between Shooting and Replaying (p. 29).
• Wait until the orange indicator stops flashing and
shines steadily, signaling that the flash is charged, then
press the shutter button.
• Insert a new CF card.
• If required, download the images to a computer and
erase them from the CF card to make space.
• Format CF card. See Formatting a CF card (p. 106).
• If reformatting doesn't work, the CF card logic circuits
may be damaged. Contact the nearest Canon
Customer Support Help Desk.
• Close the CF card slot/battery cover, then turn off the
camera.
• Close the CF card slot/battery cover, then close the lens
cover.
• The lens does not retract in this case. To let the lens
retract, close the lens cover.
Solution
See Turning the Power On / Off