Compressor; Distortion - DigiTech BP355 Owner's Manual

Compressor

A Compressor is used to increase sustain, tighten up the bass, and prevent the signal from clipping the
input of other effects. It sets a maximum boundary for the strength of a signal.
Comp Model - Knob 1 selects one of three Compressor models: DIGCMP (DigiTech
CSCOMP (Based on a Boss
Dynacomp). Press this knob to turn the selected Compressor model on and off.
Knobs 2-6 have the following functions for the various Compressor models:
Compressor
Model
digcmp
cscomp
dyncmp

Distortion

The BP355 models the tones of 18 popular distortion stompboxes, each of which can be tweaked and
modified, just like the real thing.
Distortion Model - Knob 1 selects one of 18 Distortion models. Press this knob to turn the
selected Distortion model on and off.
Based on an Ibanez
scream
Based on an Ibanez TS-808 Tube
808
Screamer
Based on a Voodoo Lab Sparkle
Spark
Drive
Based on a Guyatone
oddriv
OD-2
Based on a DOD
dod250
Overdrive/Preamp
DigiTech Redline Modified
redlne
Overdrive
Based on a Pro Co RAT
rodent
Based on an MXR
mxdist
CS-2 Compressor/Sustainer), or DYNCOMP (Based on an MXR
®
Knob 2 Knob 3
(Sustain) (Tone)
Sustain Tone
Sustain Attack
Sensitivity --
TS-9
®
Overdrive
®
250
®
TM
® Distortion +
Knob 4
(Attack) (Crossover Freq)
Attack Crossover
--
--
Based on a Boss
DSDist
Distortion
DigiTech
®
grunge
Based on a Boss MT-2 Metal Zone
zone
DigiTech Death Metal
death
Based on a DOD Gonkulator
gonklt
Ring Mod
Based on a Roger Mayer Octavia
8tavia
Based on a Demeter Fuzzulator
fuzltr
Based on a DOD Classic Fuzz
clasfz
Based on an Arbiter
fuzzY
Based on an Electro-Harmonix
big MP
Big Muff Pi
Compressor),
®
®
Knob 5 Knob 6
(Compressor
Level)
Level
-- Level
-- Output
DS-1
® TM
Grunge
®
TM
Fuzz Face
® TM
®
®
®
TM
14