Table of Contents
Advertisement
Remaining battery capacity indication
The power remaining in the BN-1 Ni-MH Battery Pack can be confirmed by pressing its power
indicator button.
Lamp Status
E
Blinking
Note
• The remaining battery capacity indication shows merely a reference. The lamp status is subject to change due to
various conditions.
Charge time and flashing count
The following table shows the battery charge time and the number of flash operations available
when different batteries are used on the FL-50 Electronic Flash.
Battery used in FL-50
None
AA/R6 alkaline battery (LR6)
AA/R6 lithium battery (LR6)
AA/R6 Ni-Mn battery (ZR6)
CR-V3 (Olympus LB-01) lithium battery pack
AA/R6 Ni-Cd battery (1000 mAh)
AA/R6 Ni-Mh battery (1900 mAh)
Notes
• Up to 10 successive full flashes are permitted. After 10 flashes, the flash should not be used for more than 10 minutes
to allow the light-emitting surface to be left cooled.
• Charging times and flash count data were obtained from Olympus in-house testing.
Battery Condition
F
Fully charged
Remaining power is low. Charge the
battery pack soon.
0%: Charge being requested
Flash interval
Approx. 1.2 sec.
Approx. 1 sec.
Flash count
Approx. 280 times
Approx. 400 times
Approx. 400 times
Approx. 400 times
Approx. 400 times
Approx. 370 times
Approx. 450 times
19
Advertisement
Table of Contents
