Reconfiguring The Dtv/Sat Channel Settings - Pioneer PDP-LX6090H Operating Instructions Manual

09 Enjoying DTV/SAT broadcasts
Viewing the "InfoBanner"
When tuning in a TV channel or an input signal changes, an
information banner ("InfoBanner") automatically appears at the top
of the screen. While watching a programme, press p to display the
InfoBanner (additional). Press EXIT or p again to hide the banner.
"InfoBanner"
S 9999 XXXX XXXXXXXXXXXXXXXXX
1 2 3
"InfoBanner" (additional)
S 9999 XXXX XXXXXXXXXXXXXXXXX
Next 11:00-12:00 Nxtworld...
1 Broadcast signal - S (Satellite)/D (Digital)/A (Analogue)
2
Channel number
3 Station name
4 Programme title
5
Sound multiplex information
6 Current time
7 Program time schedule
8
Next programme time schedule/title
9 Subtitle icon
10 Teletext icon
11 Signal information (HD/SD)
12 Favourite icon
A separate banner also appears at the bottom of the screen
showing the AV Selection mode (bottom left) and screen size
(bottom right).
Note
• The "InfoBanner" (additional) appears when:
– pressing p while watching a TV or video programme
– pressing p while the "InfoBanner" is displayed
• The above information is not displayed if it is not included in
broadcast signal.
• During multiscreen mode, the banner appears in both main and
sub screens.
Viewing subtitles
When in the DTV or SAT mode, press [ to turn subtitles on and off.
Subtitles On
Note
• When a programme is recorded with this function on, subtitles
are also recorded.
44
Downloaded From TV-Manual.com Manuals
En
STEREO 21:30
4 5
STEREO
10:00-11:00
SD
7 8 9 10 11 12
You can also use the TOOLS Menu to select subtitles. Follow the
procedure below.
1 Press TOOLS.
2 Select "Subtitle" (/).
3 Select the desired subtitle (/).
Selecting "Off" causes the subtitle to disappear.
This option toggles between "On" and "Off" for analogue
broadcasts.
6 Reconfiguring the DTV/SAT channel
settings
21:30
This section describes how to reconfigure the DTV/SAT channel
settings after setting up DTV/SAT channels using Auto Installation
(page 29). You can select "Digital Tuner Setup" only when watching
DTV/SAT channels. To manually set satellite TV channels, see
page 29.
Reselecting a country
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "System Setup" (/ then ENTER).
4 Select "Digital Tuner Setup" (/ then ENTER).
5 Select "Installation" (/ then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons 0 to 9.
6 Select "Digital Setup" (/ then ENTER).
7 Select "Country" (/).
8 Select a country (/).
Country
Aerial Power
Signal Check
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 60.
• You can select "Digital Tuner Setup" only when watching DTV/
SAT channels.
: UK
: Off
Add New Channels
Replace Existing Channels