Tv Back Panel Connections - Toshiba 50l1450u User Manual

20
Introduction

TV back panel connections

TV back panel connections
For explanations of cable types and connections, see
4
Power Cord
(Sample Illustration) 50L1450U - Back panel connections
1 ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital cable TV (QAM) signals.
2 ColorStream
and shared composite video input, see
/ DVD player, satellite receiver with ColorStreamTM or VCR"
on page 24
3 HDMI
receives digital audio and uncompressed digital video from an
HDMI
device. HDMI
signals.
4 Power Cord—Plug one end of the power cord into the jack on
the back of the unit, and the other end into a live electrical
outlet.
HD—High-resolution component video input
TM
IN—High-Definition Multimedia Interface input
®
device or uncompressed digital video from a DVI
®
connection is necessary to receive 1080p
®
The included power cord is for use with this unit only. Do not use it with other
equipment.
If you are not going to use the unit for an extended period of time, disconnect
the power cord from the wall outlet.
Whenever the power cord is plugged into the wall outlet, it will draw some
power, even when the unit is off.
Component/Standard (composite) video cables carry only video
information; separate audio cables are required for a complete
connection.
on page 21.
1 2
"Connecting a Blu-ray™
ColorStream
TM
3
or VCR"