Advertisement
I
I
-CASSETTE OPERATION: LOAD
SIDE: 1
THIS IS THE UP-TO 7 9 COLUMN HEADER MESSAGE LINE.
ERRORS DISPLAYED
PRESS EXECUTE TO
ON THIS
LINE~
CONTINUE~
PRESS CLEAR TO ABORT
&
**CASSETTE REWIND FAILURE
**DATA FILE ERROR
**BUBBLE FILE ERROR
**FATAL READ ERROR
**THIS DUMP WAS ABORTED
PLEASE INSERT NEW TAPE SIDE
&
THIS PROMPT APPEARS ONLY IF AN ERROR IS DISPLAYED ON THE LINE ABOVE.
Fig. 9. Loading RAM or Bubble Memory.
I
20219
Error messages may also be printed on the SARA 11 Printer. These are, READ ERROR ENCOUNTERED, INSER-
TION ERROR, and BAD TAPE FILE ENCOUNTERED. Tape loader software will attempt to recover from these
errors.
- If
an unrecoverable error occurs:
Either
I
~f£1 or~
cLR
~returns
control to the Cassette Operations menu.
Any PIK except
~cLR ~leaves
cassette operations and goes to the selected menu.
- If no error or a recoverable error occurs:
The~
cLR ij aborts
t~load
operation and returns control to the Cassette Operations menu.
Any PIK
except~
cLR ijaborts the load operation, leaves cassette operations, and goes to the selected menu.
- If
prompt PLEASE INSERT NEWT APE SIDE occurs:
Insert new tape side, press INITIALIZE switch on the tape loader, and
press~~~
to continue the load operation.
The
~cLR
ijaborts
t~load
operation and returns control to the Cassette Operations menu.
Any PIK
except~cLR ~aborts
the load operation, leaves cassette operations, and goes to the selected menu.
- If
the load operation is successful, the display in Fig. 10 appears.
Either~~~
or
~cLR ~returns
control to the Cassette Operations menu.
Any p IK
except~
CLR
~leaves
cassette operations and goes to the selected menu.
R5
OOR7
(,
Advertisement
