Surface Light; Automatic Fan - GE PVM9215 Owner's Manual

Surface Light Sync
Selects the light level at which the surface lights will automatically turn on when paired range' burner
is turned on.
Note: Default is 12 hours.
1
Press the Settings button and turn the dial to
select Surface Light Sync. Press the dial to
enter.
Vent Fan Sync
Selects the fan speed at which the vent fan will automatically turn on when paired range's burner is
turned on.
Note: Default is OFF.
1
Press the Settings button and turn the dial to
select Vent Fan Sync. Press the dial to enter.
Sync Auto Off
When the Light / Vent fan sync mode is enabled (ON), this will automatically turn OFF the light / fan
when the range burner has been turned off.
Note: Default is 12 hours.
1
Press the Settings button and turn the dial to
select Sync Auto Off Press the dial to enter.
Filter Replace Reminder
The charcoal/grease filter should be replaced
when it is noticeably dirty / discolored(usually
after 6-12 months, depending on hood usage) or
filter replacement LED is on.

Surface Light

Press Surface Light once for bright light, twice for the night light or a third time to turn the light off.
Surface light will turn on automatically when the cooktop burner is turned on with Chef Connection.
Vent Fan
The vent fan removes steam and other vapors
from surface cooking.
Press Vent Fan once for boost fan speed, twice
for high fan speed, three times for medium fan
speed. forth time for low fan speed or a fifth
time to turn the fan off..
NOTE: The FAN indicator will be lit while the fan is
operating.
Vent fan will turn on automatically when
the cooktop burner is turned on with Chef
Connection.
2 Turn the dial to select sync mode (Off, Low,
High). Select Off to disable this feature.
Surface light will turn on manually.
3
Press the dial to activate.
2 Turn the dial to select Vent Fan Sync mode
(Boost, High, Medium, Low, Off). Select Off to
disable this feature. Vent fan will turn on
manually.
3
Press the dial to activate.
2
Turn the dial to select the period of time the
light / fan will remain on until the microwave
automatically turns it off.
When the Filter Replace LED turned on, replace
filter and press Reset Filter and hold for 3
seconds to reset.

Automatic Fan

An automatic fan feature protects the
microwave from too much heat rising from the
cooktop below it. It automatically turns on if it
senses too much heat.
If you have turned the fan on you may find that
you cannot turn it off. The fan will automatically
turn off when the internal parts are cool. It may
stay on for 30 minutes or more after the cooktop
and microwave controls are turned off.
GEAppliances.com
21