AUTODOME IP 4000 HD / AUTODOME
IP 5000 HD/IR
3.1.13
Status icons
Various overlays in the video image provide important status information. The overlays provide
the following information:
The frame might show artifacts due to decoding errors.
Indicates that an alarm has occurred.
A communication error, such as a connection failure to the storage medium, a protocol
violation or a timeout, is indicated by this icon.
Indicates a gap in the recorded video.
The watermark set on the media item is valid. The color of the check mark changes according
to the video authentication method that has been selected.
Indicates that the watermark is not valid.
Indicates that a motion alarm has occurred.
Indicates that recorded video is being retrieved.
3.2
Playback
Click
only visible if a direct iSCSI or memory card has been configured for recording. (With VRM
recording this option is not active.)
The panel on the left has four groups:
–
–
–
–
3.2.1
Selecting the recording stream
On the left side of the browser, expand the Connection group if necessary.
To view a video input channel:
1.
2.
To view a circular or dewarped image for the full image circle:
Bosch Security Systems
Decoding error
Alarm flag
Communication error
Gap
Watermark valid
Watermark invalid
Motion alarm
Storage discovery
Playback in the application bar to view, search or export recordings. This link is
Connection
Search
Export
Track list
Click the Video Input to see the options.
Select the video channel you wish to view.
Operation Manual
Operation via the browser | en
2016.04 | 0.4 |
11