Initial Setup; Password Change; Using The Tv Controller - Samsung UA40J6300 User Manual

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, connects to your
network, implements
Smart Hub
set-top box.
To learn more about operating your TV, launch the TV's built in
Information about the
e-Manual

Password Change

System > Change PIN
Changing the TV's password.
1. Run and then enter the current password in the password field. The default password is "0-0-0-0".
Change PIN
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your code, press the buttons in the following sequence to reset the
PIN
In Standby mode: MUTE

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.
agreements, links to the source of your live TV signal, and sets up control of your cable or
, see "The " on page 8.
e-Manual
→ 8 → 2 → 4 →
POWER (On)
on the lower left corner of the
English - 4
after you have completed the Initial Setup. For
e-Manual
PIN
: Opens
Control Menu : Opens the menu.
: Selects a source.
: Turns off the TV.
Control Stick
The Control Stick is located
back of the TV.
Remote control sensor
to "0-0-0-0":
.
Smart Hub